Honing range with automatic stroking Ø 1,5 to 50 mm
Honing range without automatic stroking Ø 0,6 to 70 mm
Spindle speed 150 to 2500 RPM over central motor
Spindle motor 2,2 KW
The round-running precision of both spindles is always garantees and does not require any adjustment
2 floating universal clamping unit
Honing oil container 45 l with pump and filter insert
Machine lamp
Weight ~ 900 kg
Dimensions 1600 x 1000 x 1600 mm
Automatic expanding system AR-340 NC and NC control
No time consuming adjustments of hone and hone spindle to achieve true-running
2 workpieces or workpiece packages can be honed at the same time
Very good acces
An important advantge is the fact, that the table can accept up to 40 Kg. This means that 2 heavy parts can be honed without needing a vertical machine
Stroking speed from 0 to 180 <=>/min. over central motor
Each of the two micrometric expansion systems offers the unique possibility to hone with constant expasion speed or with constant expansion pressure
The very precise, micrometric expansion system guanatees perfect adjustments for getting the best possible performance during roughing of finishing operations
Changes of the honing Ø are possible even during the honing operation in steps of ± 0,0001 mm or 0,001 mm
The stock removal, expansion speed, expansion pressure, honing time, final Ø as well the number of parts honed are permanently indicated during the honing operation
Expansion speed from 2 to 300 sec. for 0,02 mm expansion of the hone, separate for each spindle
Automatic stop after having reached the desired Ø as well as automatic return to the Ø of deparature, separate for each spindle
Dwell from 0 to 60 sec. separate for each spindle
Shrinking depending on stock removal, separate for each spindle
Automatic fast/slow approach starting from Ø 5 mm is reducing the idle time to a minimum, and lessen the cycle time up to 50 % or more, separate for each spindle
